Tuesday, February 21, 2012

I've made some progress so I thought it would be time for an update.

2 commands have been added:

1) Move - this will move your unit but only in friendly controlled territory. This is useful for moving units around within your own territory without it accidentally getting involved in combat.

2) Advance - this will move your unit in friendly or enemy territory. This command is used to move to contact with the enemy without actually engaging them.

Both commands work with any units that have Foot, Motorized or Tracked as their mobility type.

Commands can be stacked on top of each other with each one starting where the previous one left off. They can also be much further than the range of the current turn. During the automatic movement phase, any available moves will be attempted before the player gets control.

So for example, a unit could be created in the US, move by rail to the coast, move by sea to the UK, move by rail to another port, transfer to amphibious transport, land on the beach in Normandy, drive to Paris. This could all be set up in 1 turn and as each new turn begins, the unit will attempt to execute the next leg of its journey until it reaches conclusion or is blocked.

An example of being blocked would be a unit is given a Move command which is valid at the time it is ordered but before it reaches its destination, one of the hexes on its route is taken over by the enemy. At this point the unit will stop at the hex before the illegal hex.

You can delete all the commands by selecting the unit and hitting the delete key. So for the example above, you could delete the blocked move and then give the unit a new command, for example an advance that would now allow it to travel through enemy territory.

Also added is a red dashed border to display the front line between friendly and enemy controlled territory.

Monday, January 9, 2012


Here's a recent screen shot. I like the look of the map. The toolbar elements are ok but I just can't keep wasting time on re-skinning the whole interface. Fortunately, everything is image driven so it would be easy for a user to redo the entire interface as long as they stick with the size constraints.

The 10 buttons are displayed in play mode. They are (right to left, top to bottom):
1) Unit Production
2) Economy
3) Diplomacy
4) Research
5) Espionage
6) Trade
7) Options
8) End Turn*
9) Save Game*
10) Exit*

* implemented.


Obviously, everything is in a development state. But this is probably the look I'm going with.

As far as development of the game itself, I've added pathfinidng, rangefinding and a movement command. You can now click on a unit, right click on a target hex and select move from the dropdown menu. The unit will plot the shortest path and move to the new location.

Rangefinding will get a list of all cells within a given range of a source cell. Currently this is being used to allow the editor to fill in multiple cells at one time.

The editor has the following layers implemented:
1) Land type
2) Terrain
3) City

The next one up is rail. This will be edge based so it will be a bit trickier than the previous 3 that are all cell based. Rail will also include setting the infrastructure level of a cell which can have 1 of 4 levels:
0 - Little or no infrastructure. Possibly some roads and trails and small villages. No ports, or major roads or population center.
1 - Rural. Some roads, lots of small towns and villages and farmland in clear areas.
2 - Suburban. Better roads, rail and medium to large population centers.
3 - Heavy Urban. Very large population centers. Large, well developed areas with heavy infrastructure including large roads and bridges, heavy rail, factories, large appartment buildings and other heavy structures that can be used to provide cover and heavy resistance to invading units. These will be the most defensible hexes in the game.

There will be 2 types of rail. Russian and European. Only significant on the Eastern Front where invading armies will have to take the extra time to convert over rail which will slow up progress invading. Even though the US had a different sized rail, there is no point including it as it will never have to link up with non US guage rail.

Monday, December 5, 2011

Progress


1) Map - The map look is pretty far along. Here is the status of the textures:

A) Land - Land is solid. I like the canvassy look.

B) Water - Water is good also.

C) Mountains - Still need a little tweaking, want them a little 'rougher'

D) Forest - Forests are perfect, IMO. The Cicada principle worked very well here.

E) Rivers - I think the river technique of 'cutting' the land is working well.

F) Rail - Good but I think I'll need to do this as a separate post production layer.

G) Cities - Haven't really done much here

H) Desert - Need a new texture for this, looks crappy and has a funny green edge I need to get rid of.

I) Frozen - Haven't done yet but seems like a simple whitish blue overlay will suffice.

J) Marsh - Not addressed yet. Will use either a Cicada technique or global noise.

2) Units - The units are looking pretty good so far. Probably can't squeeze much more detail.

3) Base scenario - Spain needs to be finished, both the graphic level and the map level. This is the next big development push.

4) Editor - The editor is mostly laid out but just needs to be finished in terms of handling all layers. Right now, only land type is supported.

5) Game mechanics - Have implemented simple orders (Move and working on Attack). Pathfinding is complete. Need to add alliances and game phases.




Grand Strategy War In Europe Overview

Its hard to believe its been 5 years since my last attempt at this monster.

I've restarted from scratch using a new library, new mapping techniques and a smaller scale.

Here's a quick overview of the new game:

1) Mission based movement and combat.

All movement and combat is mission based. Missions can be either active or reactive. Active missions (move, transport, attack, etc.) are executed during player’s turn. Reactive missions (intercept, hold, delay, blockade, etc.) are performed during enemy’s turn.

2) Realistic navy model.

The mission based system allows for much more realistic naval interaction. No more floating divisions. Naval units have a port, mission and area of operation. Sighting, evasion and combat are handled realistically depending on missions of opposing units, combat capabilities and weather.

3) Realistic air model.

Air units perform realistic historic missions using the mission based system.

4) Stacking.

Both enemy and friendly units may occupy and even finish their turn in the same strategic hex. This allows for more realistic battles especially where land area is small (amphibious invasions, island hopping, etc.)

5) Detailed land battles.

In addition to mission based land movement, land units can engage in detailed combat (optional). In this case, a zoomed in view of the combat hex is loaded with operational level units available to maneuver on the operational map.

6) Learning AI.

The AI watches what you do game after game and attempts to learn from successful behaviour. Launch an especially effective Overloard as the Allies and you may find yourself facing a similar invasion the next time you play the Axis. This unique ability allows you to essentially ‘train’ the AI by beating it.

7) Global AI server.

Each customer will have the ability to enable the global AI server. This will cause your saved games to be uploaded to a global server where they can be analyzed. In exchange, your own AI will ‘learn’ from the AI server. This allows the accumulation of a great number of playing styles from different players around the world.